Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures at carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Windscreen damages as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of a stekloomyvatel of a windscreen
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windscreen
      Removal and installation of the lever of a back screen wiper
      Removal and catchment basin installation
      Removal and cowl installation
      Removal and installation of facing of a cowl
      Cowl adjustment
      Removal and installation of the lock of a cowl
      Detachment of a cable of a drive from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and bumper installation
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Door adjustment
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and trunk lid installation
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and back door
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + salon Equipment
+ Onboard electric equipment






Removal and installation of the cylinder of the lock of a luggage carrier and back door

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) the storage battery at the switched-off ignition. Previously it is necessary to remove a box of the filter of air of salon. Before a detachment of a cable find out a protective code of a radio receiver if that is available, address to the Section Replacement of the storage battery.
2. Remove facing of a door of a back or a trunk lid, address to appropriate section.
3. Disunite the socket at the locking mechanism.
4. If necessary remove the locking mechanism, address to appropriate section.
5. Remove an emergency natural of the ignition key, address to the Section Replacement of the battery of a key of an ignition/remote control.

6. Insert an emergency key into the lock and turn counter-clockwise so that in a groove (1) the opening seemed.

7. Insert into an opening the tool for съёма (2), release the cylinder of the lock and take out it from the lock.

The tool for съёма can be made independently of V2A wire in diameter of 1.5 mm.


Installation

 PERFORMANCE ORDER

1. Insert an emergency key into the lock cylinder, turn counter-clockwise and displace the cylinder in the lock.
2. Turn an emergency key clockwise so that the cylinder was fixed.
3. Take out an emergency key from the lock and insert into the ignition key, address to the Section Replacement of the battery of a key of an ignition/remote control.
4. If it is necessary, establish the locking mechanism, address to appropriate section.
5. Join the socket at the locking mechanism.
6. Establish into place facing of a cover of a luggage carrier/door of a back, address to appropriate section.
7. Attach a negative cable (-) to a battery battery room at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of a radio receiver and establish time on hours.