|
1. Open a back door.
2. Remove facing of a door of a back, address to appropriate section.
|
|
3. Take out cable conducting (3). Disunite all sockets (1) and disconnect all wires (2) on a door of a back and pull out them through cable conducting (3). On an arrow 2 screws are specified. On an illustration the door of a back of the Versatile person model is shown. |
4. Disconnect a water hose at a connecting element or a jet of a stekloomyvatel and take out through cable conducting.
5. Sporty coupe: By means of a plastic wedge separate facing in a back part of a roof and pull it a little back. Carefully insert wooden whetstone in height of 65 mm between a roof and facing.
|
|
Before removal of a gas-filled emphasis ask surely the assistant to take a back door. Otherwise the door can fall, since it is not kept by one emphasis. |
|
|
6. Disconnect a gas-filled emphasis from a spherical support on a door of a back and remove it. For this purpose raise an emphasis a screw-driver (an arrow on an illustration) a little. The second emphasis acts in film similarly. |
7. Versatile person: Turn out on two bolts of fastening on each loop at the left and on the right (shooters on an illustration).
8. Sporty coupe: Unscrew 2 nuts on a loop between a roof and facing.
9. By means of the assistant remove a door of a back and put it on a lining. |