|
|
Separate characteristics are provided also in the text of Head and in case of obligation of their performance are allocated with a bold print |
|
General parameters
|
| Greasing of power shafts |
Internal CV JOINT, гр | 100
|
External CV JOINT, гр | 100
|
At replacement of a protective cover the hinge, if necessary, add with greasing. |
Differential | 1.1 l, oil for gipoidny SAE85W90 MV-235.7 broadcasts or "VR Energear MBE"
|
Corner between axes (in brackets for all-wheel drive models 4MATIC)
|
Transmission and forward driveshaft, hail. | - 0.5 … +0.67 (-0.6 …-1.1)
|
Forward and back driveshaft, hail. | +0.17 … +1.0 (-0.6 … +0)
|
Back driveshaft and differential, hail. | - 0.83 …-0.17 (-0.1 …-0.9)
|
Diameter of a driving gear wheel of differential, mm | 185 or 198
|
Transfer relation of the main transfer
|
2.65 (45:17) |
|
2.87 (43:15) |
|
3.27 (36:11) |
|
3.27 (49:15) |
|
3.46 (45:13) |
|
Efforts of a tightening of carving connections, Nanometer
|
The moments of an inhaling of fixture are given also in the text of Head and on some иллюстрациях*. |
*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly |
Bolts of fastening of a basket of coupling to a flywheel | 25
|
Lever of switching off of coupling |
|
| 9
|
|
| 8
|
Fastenings of a back support of an engine/check point |
Bolts (2) | 25
|
Bolts (3) cross-pieces behind to a body | 40
|
Bolt or nut of fastening of a support of the engine to a check point | 50
|
Nuts of a flange of the driveshaft to a check point: |
|
| 40
|
|
| 60
|
Nuts of a flange of the driveshaft to a flange of the main transfer |
|
| 40
|
|
| 60
|
Bolt of fastening of a back cover to a reducer | 50
|
Drain stopper of differential | 50
|
Jellied stopper of differential | 50
|
Sapun | 30
|
Bolt of fastening of a conducted gear wheel to differential | 85 |