Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
- Routine maintenance
   Specifications
   Indicator of term of approach of planned maintenance (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and oil filter
   Checks of brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid. Liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting on leakages of oil
   Condition check suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of system of adjustment of a road clearance
   Check of central air of air
   Cleaning of the mechanism of the movable panel of the hatch of a roof
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of system of an emergency call of Tele-Aid
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Check, cleaning and greasing of the coupling device
   Replacement of brake liquid
   Check of the elastic coupling of the driveshaft
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Routine maintenance

Introduction

This Head is made to help the amateur mechanic to support the car in a condition of maximum efficiency of operational parameters, profitability, safety and reliability. Further you will find the full schedule of procedures of routine maintenance of the car, and also the Sections devoted to the description of service of its separate systems in Head. Descriptions of visual checks, adjustments are included in Sections, replacements a component and other good advice. Separate a component illustrations with types of an impellent compartment and the car bottom will help to define a site. Serving the car according to the kilometrazhno-time schedule and following the detailed remarks provided below, you receive the accurate program of the service, capable to provide long and reliable service of your car. Remember that this plan is exhaustive, and performance of its separate points and neglect others will not give expected result.

Current leaving

In the course of car service you are convinced soon that is possible - and it is necessary - to combine many procedures in view of similarity of actions on their performance. For example, if the car is raised over earth for chassis greasing, follows at the same time while you are under the car, to examine system of production of the fulfilled gases, a suspension bracket, system of a steering and fuel system. If wheels are removed for carrying out other works, there is a sense to check brake mechanisms. And at last, suppose, that you had to borrow or hire a dinamometrichesky key. Even if it is necessary to you only to tighten a spark plug, you can check at the same time efforts of a tightening of so many critical nuts and bolts, on time how many will suffice.

The first step in implementation of the program of maintenance of the car is self-preparation. Attentively study materials of all Sections relating to the forthcoming procedures, then prepare all necessary materials, the equipment and tools. If you are afraid to face problems at performance of any concrete works, consult at the expert or at the person who was already carrying out this work.

HUNDRED in addition, at each service, by means of the device for poll of memory of malfunctions read out data from memory of malfunctions of electronic monitors of the engine, ABS, a safety cushion and anticreeping system. It is for this purpose recommended to address through certain periods on HUNDRED. Thus it is necessary to mean that some malfunctions, for example the failed sensors of a control system of the engine, do not lead to appreciable decrease in characteristics of the car. Monitors have a mode of emergency functioning or work at the average values of parameters brought in memory that cannot be revealed by the driver. Poll of memory of malfunctions is carried out via the diagnostic socket.


Service is carried out according to a certain term and car run.