|
1. Lift and establish the car on supports.
2. If it is necessary, remove the bottom cover of an impellent compartment, address to the Section Removal and installation of a cover of an impellent compartment from the bottom.
|
|
3. Visually check, by means of a lamp, the elastic coupling of the driveshaft on existence of wear, damages and deformations. |
4. Check existence of cracks of dempfiruyushchy elements around plugs.
5. If necessary replace the driveshaft coupling. In the presence of deformations unload on a shaft. If deformations remain, replace the coupling.
6. Check dempfiruyushchy elements on existence of cracks. If necessary replace them.
7. Lower the car on wheels. |