|
|
The car should not be loaded. |
1. Switch off ignition.
|
|
2. Uncover (1) on a broad tank (2) m take out the level index. |
3. Wipe the index a rag and again insert against the stop.
4. Take out the index and determine by it oil level.
5. At cold oil its level should be between marks of "MIN" and «MAX» (4/3) indexes. Oil is considered cold if its temperature makes approximately +20°С.
6. If it is necessary, add in system oil. It is necessary to add only new oil as even insignificant pollution can result in malfunctions in hydrosystem work.
7. When filling system with oil it is necessary to apply a pure funnel and a sieve from the thin yachey. |