Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
- Routine maintenance
   Specifications
   Indicator of term of approach of planned maintenance (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and oil filter
   Checks of brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid. Liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting on leakages of oil
   Condition check suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of system of adjustment of a road clearance
   Check of central air of air
   Cleaning of the mechanism of the movable panel of the hatch of a roof
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of system of an emergency call of Tele-Aid
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Check, cleaning and greasing of the coupling device
   Replacement of brake liquid
   Check of the elastic coupling of the driveshaft
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Check of a condition of protective covers of power shafts

 PERFORMANCE ORDER

1. Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (CV JOINT) from hit on them of dirt, water and other extraneous subjects causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers therefore it is recommended to wash periodically covers with water with soap.

2. Examine covers on existence of gaps and cracks, and also the weakened collars. In case of detection of signs of cracks or leakage of greasing the cover should be replaced.

3. At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or an otvorachivaniye of a lock nut of a shaft.