1. Unscrew 2 Torx screws of fastening of a cover of a compartment for feet of the forward passenger. Lower a few cover, on the right side pull back and take out from the left channel of warm air. 2. Displace back and uncover near the fan electric motor.
|
3. Take out down both filters (4).
|
It is not necessary to clear the filter. Through the established intervals of time it is necessary to replace it. |
|
The accompanying illustration has informative character and cannot correspond to considered model completely. |
|
4. Insert the filter into an opening near the heater fan. 5. Establish into place a cover and displace it back. 6. Establish and fix a compartment cover for feet. |