|
1. Liquid level is measured in automatic transmission at the heated-up engine and a transmission. For warming up of the power unit to necessary temperature you can make short (15 kilometers) a trip.
2. Place the car on a horizontal surface, reliably tighten the hand brake. For reliable fixing of the car enclose under prop wheels.
3. Get the engine and leave to work at single turns. Press a pedal of a brake and accurately move the selector from situation P to situation 1, then back to the River.
4. Shchup of measurement of level of liquid is located in a back part of a transmission. Before taking щуп, carefully wipe space round it. Dirt hit in a box is inadmissible.
|
|
5. Take щуп and with rags remove from it all traces of liquid. Return щуп on a place and take again. Level of liquid should be between the labels put on щуп.
|
|
If you measure level at the cold power unit, the received result will be lower than the real. Surely check level on the heated-up engine as excess of the maximum admissible level of liquid can lead to a box exit out of operation. |
|
6. Dolivaniye of liquid is carried out through a well measuring щупа. Do not allow dirt hit in a box. Add only fresh liquid and only through a funnel (it is desirable with the filter).
7. Liquid add in the small portions, constantly checking level.
8. After you restored liquid level in a box, return щуп on a place and muffle the engine.
9. If you have to add often liquid in a box, it means that somewhere there is a leak. Immediately eliminate it. |