Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures at carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Windscreen damages as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of a stekloomyvatel of a windscreen
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windscreen
      Removal and installation of the lever of a back screen wiper
      Removal and catchment basin installation
      Removal and cowl installation
      Removal and installation of facing of a cowl
      Cowl adjustment
      Removal and installation of the lock of a cowl
      Detachment of a cable of a drive from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and bumper installation
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Door adjustment
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and trunk lid installation
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and back door
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + salon Equipment
+ Onboard electric equipment







Removal and installation of facing of a door of a back

Facing of a door of a back. Sporty coupe

1 — Planck of the handle
2 — the Bottom facing
3 — the Button of a lock cable
4 — Lateral facing of a frame
5 — the Lock bracket
6 — the Top facing of a frame
7 — the Lock bracket
8 — the Cover
9 — the Central facing
10 — the Lock pad
11 — Screws
12 — the Cover
13 — the Decorative level

Sporty coupe

Removal

Designations «oben» (top) and «unten» (bottom) belong to a closed position of a door of a back.


 PERFORMANCE ORDER

1. Open a back door.
2. Take out razzhimny a clip from a handle (1) level.
3. Take out 2 pads from an aperture for the handle and pull a level for the handle from a back door.
4. Pull the bottom facing (2) down from a door of a back and remove.
5. Turn out the button (3) of a lock cable of the right and left shelf from lateral facing of a window.
6. Separate and remove by means of a plastic wedge, for example, HAZET 1965-20 lateral facing of a frame (4) on the right and at the left at a back window from holders of brackets (5).
7. Disconnect the top facing (6) from below from holders of brackets (7) and remove facing up. Thus do not break plastic levels inside.
8. Disconnect a cover (8) from the central facing of a door of a back (9). Thus a plastic wedge put below and disconnect a cover from three holders (10).

Cover (8) on an illustration it is shown the increased size.

9. Turn out screws (11) behind a cover and below at facing (9).
10. Disconnect facing below and remove it up from a back door.


Installation

 PERFORMANCE ORDER

1. Insert the central facing below in directing and fix. Fix facing on a back door.
2. Further installation is carried out in sequence, return to removal.