Mercedes C-Class

1. Open a luggage carrier and take out warning sign from the holder.
2. Take out razzhimny clips from facing on a trunk lid. For this purpose hook a clip pin a plastic wedge, for example, HAZET 1965-20 and take out it. The pin can be taken out differently, for example, having wrapped it a strong thread, and having pulled for a thread.

3. Take out clips (1) of facing on trunk lid wings.

4. Disconnect lock levels (2) and pull back facing of wings.

5. Turn out 2 screws of fastening.

6. Insert a narrow screw-driver or a knife into a gap in an aperture for the handle, press up (arrow 3) and separate a slip (2) from a trunk lid.
7. Disconnect a level (4) screw-driver from a trunk lid, at the same time shift the holder of a warning sign to the left (arrow 5) and remove from a trunk lid.
8. Disconnect facing from a trunk lid and remove it.

1. Establish facing on a trunk lid, insert it between facing of wings and fix clips.
2. Fix facing of wings by clips and lock levels.
3. Establish the holder of a warning sign on a trunk lid and displace to the right so that the level was fixed.
4. Fix a slip on a trunk lid and fix it. Insert warning sign in the holder.
5. Close a trunk lid and check correctness of its situation. If it is necessary, adjust a rubber emphasis by their rotation so that the cover was correctly closed. For this purpose lead round an emphasis above chalk, close a cover and on a print of chalk check, whether a rubber emphasis adjoins.