Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + the Automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and operating signals
      Removal and AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes В2, В3 and a blocking gear wheel at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of multidisk brake В1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of multidisk brake В1
      Dismantling and assembly of multidisk brake В2
      Dismantling and assembly of a target shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings К1, К2 and К3
      Dismantling and assembly of coupling К1
      Dismantling and assembly of a leading shaft with coupling К2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling К3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






The AT electrohydraulic control unit (AT is established)

AT electrohydraulic control unit

2 — the Transmission
3 — the Pallet
3а — the Connector
3b, 19а — Bolts
4 — the Drain stopper
5 — the Oil filter
19 — the Electrohydraulic control unit
21 — the Directing plug
26 — the 13-contact socket
62 — the Guard
and — the Opening under the sensor of frequency of rotation of n3 (Y3/6/2)
b — the Opening under the sensor of frequency of rotation of n2 (Y3/6/2)

Removal

 PERFORMANCE ORDER

1. Establish the lever of the selector of gear shifting in the situation "R".
2. Remove a guard (62) and disconnect the 13-contact socket (26).
3. Weaken directing plug (21) and remove it from transmission.
4. Merge transmission liquid, having unscrewed a stopper (4).
5. Remove the pallet (3).
6. Remove the oil filter (5).
7. Unscrew bolts (19a) and remove the electrohydraulic block (19).


Installation

Installation проходится as it should be, the return to removal.