The device, service, repair of Mercedes-Benz C of Class (W-203 c 2000г) - Removal and installation of multidisk couplings К1, К2 and К3-//Mercedes Benz - mikbookmarket.ru

Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + the Automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and operating signals
      Removal and AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes В2, В3 and a blocking gear wheel at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of multidisk brake В1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of multidisk brake В1
      Dismantling and assembly of multidisk brake В2
      Dismantling and assembly of a target shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings К1, К2 and К3
      Dismantling and assembly of coupling К1
      Dismantling and assembly of a leading shaft with coupling К2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling К3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment







Removal and installation of multidisk couplings К1, К2 and К3

Removal and installation of multidisk couplings К1, К2 and К3

12 — the Target shaft with the central and back block of planetary gear wheels and coupling К3
13 — the Persistent needle bearing
13а — Persistent laying
58 — the Leading shaft with coupling К2 and the forward block of planetary gear wheels
58а — Teflon rings
83 — Coupling К1
138 — the Solar gear wheel of the forward block of planetary gear wheels
And — the Oil channel for coupling blocking
In — the Oil channel to coupling К2

Removal

 PERFORMANCE ORDER

1. Disconnect the transmission case from the case the hydrotransformer.
2. Remove a target shaft with central and back blocks of planetary gear wheels and coupling К3 (12).
3. Remove the persistent needle bearing (13) and persistent laying (13а).
4. Remove a leading shaft with coupling К2 and the forward block of planetary gear wheels (58).
5. Remove coupling К1 (83).


Installation

 PERFORMANCE ORDER

1. Grease and establish everything together teflon rings in a groove in brake В1.
2. Establish coupling К1 (83).
3. Grease and establish everything together teflon rings (58а) in a groove of coupling К2.
4. Establish a leading shaft with coupling К2 and the forward block of planetary gear wheels (58).
5. Establish persistent laying (13а) and the persistent needle bearing (13).
6. Establish a target shaft with the central and back block of planetary gear wheels and coupling К3 (12).
7. Establish the transmission case on the hydrotransformer case.