Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + the Automated box of gear shifting 716.6
   + Automatic transmission 722.6
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Specifications

 Separate characteristics are provided also in the text of Head and in case of obligation of their performance are allocated with a bold print.


General parameters
Type
5-step, automatic with electronic control by gear shifting or 6-step «Sequentronic» automated by a check point
Designation
722.6 (W5A 330/580) or 716.6 respectively
Applied liquid
7.0 l, MB No. 001 989 21 03 10
9.0 l, MB No. 001 989 21 03 10
Codes of diagnostics of system of electronic control by automatic transmission see. Head engine Electric equipment.
Transfer relations and turning on of AT 722.6 activators

* switching Activators only in a mode kik-Down

Main transfer
3.06: 1 (3.27: 1)

Fastenings of a back support of an engine/check point

Bolts (2)

25

Bolts (3) cross-pieces behind to a body

40

Bolt or nut of fastening of a support of the engine to a check point

50

Nuts of a flange of the driveshaft to a check point:

М10

40

М12

60
716.6

Plait of cables to RKPP

  • below on the right
15
  • below at the left
10

Holder of the socket of sensors of an angle of rotation

10

Holder of the central socket

10

Weight point on a check point

10

Stopper of removal of check point oil

60

Stopper of filling of a check point oil

50

Accumulator collar at a check point case

15

Bolt of fastening of the sensor of an angle of rotation to a sensor level

3

The ventilation case at a check point

6

The hydraulic block at a check point

  • above
7.5
  • below
9.5

The pump to a check point case

7.5

Square to a check point case

3

The tank to a check point case

9.5

The bridge of the central block of gear shifting to the bottom

23

The switch of a lamp of a backing to a check point case

10

Payment of sensors to a check point case

3

Lock plate to a check point

9

The connecting plug to the central axis of gear shifting

11.5

The moving sensor to the lever of switching off of coupling

3

722.6

Oil stopper of AT

20

Oil stopper of the AT hydrotransformer

16

Pallet AT bolts

8

Lock screw of draft of the AT selector

12

Bolt of fastening of the hydrotransformer to the leading disk M8

42

Drain stopper in the transmission pallet

20

Nut of fastening of the driveshaft to transmission М12

60

Bolt of fastening of the electromagnetic valve to a gear shifting plate

8

Bolt of fastening of a cover of the case of valves to the case of M6kh30 valves

8

Bolt of fastening of a lateral cover to a cover of the case of valves and the case of M4kh12 valves

4

Bolt of fastening of the case of transmission to the hydrotransformer case

20

Bolt of fastening of the pallet to the case of transmission 8

Nut of fastening of a flange of a target shaft

200

Bolt of fastening of the electrohydraulic control unit to the transmission case

8

Bolt of fastening of multidisk brake В2 to the transmission case

16

Bolt of fastening of a doggie to the lever of the selector of gear shifting

8

Drain stopper of the hydrotransformer

16