Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of a razzhimny clip
      Removal and cover installation under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and cover installation under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and facing installation in a cargo compartment
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and shelf installation
      Removal and installation of facing of racks And and In
      Removal and installation of facing are resistant C
+ Onboard electric equipment







Removal and installation of a cover of the top part of the central console

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) the storage battery at the switched-off ignition. Previously it is necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of a radio receiver if that is available, address to the Section Replacement of the storage battery.

2. Remove the central air deflector.
3. Uncover the switching/selector lever as it is described in the Section Removal and installation of the central console.
4. Take out the ashtray case from the central console as it is described in the Section Removal and installation of the central console.

5. Open spring brackets (arrows on an illustration) below at a cover (1). (2) – the control unit a heater from a reverse side of a cover.

6. Uncover the top part of the central console.
7. Disunite the socket of a heater and the management switch from a reverse side of a cover.


Installation

 PERFORMANCE ORDER

1. Join the socket of a heater and the management switch from a reverse side of a cover.

2. Establish a cover in the top part of the central console, enter spring brackets below in the lower part (shooters on an illustration) consoles (1) and fix.

3. Further installation is carried out in sequence, return to removal.
4. Attach a negative cable (-) to a battery battery room at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of a radio receiver and establish time on hours.