Mercedes C-Class

1. Release a back seat and cast away it forward.
2. Displace aside a rug and unscrew nuts of fastening of a seat belt under a seat.

3. Again cast away back a seat, uncover under a seat and unscrew a nut (1) fastening of a loop.

4. Remove a back seat from a floor and take out it.

5. Turn out a bolt (1) fastening of a lateral pillow of a back of a back seat and take out a pillow breakthrough from the holder.

6. Displace aside a rug and unscrew a bolt of fastening of a pillow between a back seat and a seat back.
7. Turn out a bolt of fastening of the lock of a seat belt on a car floor.
8. Turn out 2 bolts of fastening of a pin of a loop on the right outside at a wheel arch.
9. Turn out nuts of fastening of a collar on a car floor.
10. Release a back of a seat and cast away it forward.

11. Unscrew other nuts (1) fastening of a collar of a support (2).

12. Disconnect drafts of release of backs of a seat.
13. Take out 1/3 right backs.
14. Remove 2/3 backs from the left pin of a loop.

Installation is carried out in sequence, return to removal.