Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of a razzhimny clip
      Removal and cover installation under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and cover installation under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and facing installation in a cargo compartment
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and shelf installation
      Removal and installation of facing of racks And and In
      Removal and installation of facing are resistant C
+ Onboard electric equipment






Removal and installation of a forward seat

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) the storage battery at the switched-off ignition. Previously it is necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of a radio receiver if that is available, address to the Section Replacement of the storage battery.

2. Lower a head restraint and a steering wheel.
3. Displace a seat completely forward.

4. Uncover over a belt tip. Turn out a bolt at a tip.

5. Turn out 2 bolts behind at directing seats.

6. Displace a seat completely back. If there is a fire extinguisher, take out it from the holder and turn out 2 bolts in front at directing seats.

7. Disunite sockets (1) and (2) under a seat.

8. Take out a seat.


Installation

 PERFORMANCE ORDER

1. Establish a seat into place. Thus the lock finger at directing seats should enter into an opening.
2. Join sockets under a seat.
3. Fix directing seats in front and behind the moment 50Нм.
4. Fix a bolt of a tip of a belt the moment 30Нм.
5. Establish to the place of a cover.
6. Establish in the holder the fire extinguisher.
7. Attach a negative cable (-) to a battery battery room at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of a radio receiver and establish time on hours.