Mercedes C-Class

W203 since 2000 of release

Repair and car operation

+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of a razzhimny clip
      Removal and cover installation under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and cover installation under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and facing installation in a cargo compartment
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and shelf installation
      Removal and installation of facing of racks And and In
      Removal and installation of facing are resistant C
+ Onboard electric equipment

Removal and facing installation in a cargo compartment

Versatile person



1. Cast away a back seat forward and establish it vertically.
2. Remove a lateral pillow of a back seat, thus turn out a bolt under a seat and take out a pillow from holders.

3. Remove a screw-driver a cover (1).

4. Turn out a bolt (2) and remove the left luggage eye.
5. Remove also right luggage eye.
6. Take out a cover of the bottom (3) behind a back seat.
7. Turn out a screw emphasis (4) for a roller. Remember its situation: The roller after installation should adjoin to the right and left screw emphasis.
8. Uncover a lateral aperture.
9. Turn out 2 screws (5).
10. Disunite the socket of the socket (6) and take out lateral facing (7).



Installation is carried out in sequence, return to removal.