Mercedes C-Class

W203 since 2000 of release

Repair and car operation


Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   + Corners of installation of wheels of the car
   - Steering and safety cushions
      Steering and safety cushions - general information and security measures
      Security measures at works with a safety cushion
      Removal and installation of the block of a safety cushion on a steering wheel
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of a protective cover of the steering mechanism
+ Body
+ Onboard electric equipment





Removal and installation of the block of a safety cushion on a steering wheel

Safety cushions

1 — the Safety cushion of the driver
2 — the Safety cushion of the forward passenger
3 — a head Safety cushion 		4 — the Lateral safety cushion back
5 — the Lateral safety cushion forward

Removal

 PERFORMANCE ORDER

Familiarize with security measures at the address with a safety cushion.

Illustrations have informative character and cannot correspond to considered model completely.

1. Disconnect a negative cable (-) the storage battery at the switched-off ignition. Previously it is necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of a radio receiver if that is available, address to the Section Replacement of the storage battery.

2. Isolate both poles of the storage battery to exclude possibility of casual contact.
3. Completely extend a steering wheel for what release the lock lever.

4. Turn out from within through openings on a steering wheel (1) two screw with an internal shestigrannik on 30 mm, holding thus the safety cushion block.

On an illustration the block of a safety cushion is already removed. (2) – switch of the index of turn.

5. Remove the block of a safety cushion (3) from a steering wheel and disunite the socket (4) fuses.

6. Put the safety cushion block so that the pillow of a steering wheel looked up.

Do not leave the safety cushion block without supervision, if necessary clean it and close.


Installation

 PERFORMANCE ORDER

1. Put the safety cushion block on a steering wheel and fix the socket so that distinct click was heard.
2. Grease bolts of fastening with a compound for fixing of carving connections and tighten the moment 6Нм.
3. Attach a weight cable (-) the storage battery at the switched-off ignition. Establish into place a box of the filter of air of salon. If it is necessary, enter a code of a radio receiver and establish time on hours.