Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
- Cooling and heating systems
   - Cooling system
      Antifreeze - means of protection from freezing
      Replacement of cooling liquid - general comments
      Removal and replacement of hoses of system of cooling
      Removal and thermostat installation
      Thermostat check
      Check of system of cooling under pressure
      Removal and installation of the pump of cooling liquid
      Removal and fan installation
      Removal and radiator installation
   + Systems of ventilation, heating and air conditioning
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Removal and fan installation

Models with RKPP

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) the storage battery at the switched-off ignition. Previously it is necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of a radio receiver if that is available, address to the Section Replacement of the storage battery.

2. Remove the fan, address to the Section Removal and installation of the air filter.
3. Remove an air inlet.
4. Disunite the electrofan socket.
5. Twist lock fingers on the right and at the left.
6. Turn out screws of fastening of the holder of the lock on the right and at the left.
7. Compress lock brackets of a radiator on the right and at the left and disconnect the holder of the lock.
8. Compress electrofan brackets on the right and at the left and pull the electrofan upward.
9. Take out the electrofan up.

Thus slightly pull the holder of the lock forward.


Installation

 PERFORMANCE ORDER

1. Establish the electrofan so that its levels entered into reception elements of a radiator on the right and at the left.
2. Further installation is carried out in sequence, return to removal.
3. Attach a weight cable (-) the storage battery at the switched-off ignition. Establish into place a box of the filter of air of salon. If it is necessary, enter a code of a radio receiver and establish time on hours.