Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
- Engine
   Compression check in engine cylinders
   Engine check by means of the vacuum gage
   Removal and installation of a cover of an impellent compartment from the bottom
   + 4-cylinder petrol engines
   + 6-cylinder petrol engines
   - Diesel engines
      Removal and installation of the top cover of the engine
      Installation of the piston of the first cylinder in situation VMT
      Removal and installation of a cover of a head of cylinders
      Removal and installation of a head of cylinders
      Removal and installation of a forward cover
      Removal and installation of the top directing chain
      Replacement of chains of a drive of GRM and installation of phases of a gazoraspredeleniye
      Removal and installation of camshafts
      Removal and installation of an intermediate asterisk
      Removal and installation of a natyazhitel of a chain
      Removal and installation of a maple belt
   + System of greasing of the engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment







Removal and installation of an intermediate asterisk

Removal

 PERFORMANCE ORDER

1. Remove the top covers of the engine, address to appropriate section.
2. Remove nozzles, address to the Section Removal and installation of nozzles.
3. Uncover heads of cylinders, address to appropriate section.
4. Establish the piston of the first cylinder in situation VMT, address to the Section Installation of the piston of the first cylinder in situation VMT.
5. Fix a camshaft of inlet valves as it is described in the Section Removal and installation of camshafts.
6. Remove a natyazhitel of a chain, address to appropriate section.
7. Remove a forward cover, address to appropriate section.
8. Remove top directing, address to appropriate section.
9. Remove TNVD.
10. Mark a camshaft asterisk in relation to a chain. For this purpose connect an asterisk and a chain a cable connector.
11. Disconnect an asterisk from a camshaft of final valves and remove together with a chain.
12. Disconnect an intermediate asterisk and take out together with the plug.


Installation

 PERFORMANCE ORDER

Installation is carried out in sequence, return to removal. Separate operations are described in the Section Removal and installation of camshafts.
The moment of an inhaling of a bolt of fastening of an intermediate asterisk of TNVD makes 40Нм.