Mercedes C-Class

W203 since 2000 of release

Repair and car operation

Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Corners of installation of wheels of the car
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of a road clearance of a body of the car
   + Steering and safety cushions
+ Body
+ Onboard electric equipment

Adjustment of forward wheels

Ruler for measurement of a convergence of forward wheels


Beissbarth — No. P860 000 883, No. P 872 Matra — No. 002 548 199 074	Bosch — No. 2 688 190 000, No. 1 688 190 022

Adjustment of disorder and longitudinal inclination of an axis of turn of forward wheels – is made by means of an ekstsentrikovy bolt

Check and adjustment of a convergence of forward wheels

Adjustment of disorder is carried out by a forward ekstsentrikovy bolt (19), and the longitudinal tilt angle of an axis of turn of a wheel is regulated by a back ekstsentrikovy bolt (20) on the bottom lever.

Check and adjustment of a convergence of forward wheels

PERFORMANCE ORDER

1. Establish wheels in situation for rectilinear movement by means of the device (055).
2. Check the central position of the steering mechanism and a steering wheel (arrow).
3. Establish a ruler (030) between internal surfaces of forward wheels. Check a convergence of forward wheels.
4. Adjustment of a convergence is carried out by rotation of steering drafts (10).
The convergence of forward wheels is given in Specifications.