Mercedes C-Class

W203 since 2000 of release

Repair and car operation



Mercedes-Benz
+ Mercedes-Benz Cars of a class C (W-203)
+ Operation manual
+ Routine maintenance
- Engine
   Compression check in engine cylinders
   Engine check by means of the vacuum gage
   Removal and installation of a cover of an impellent compartment from the bottom
   + 4-cylinder petrol engines
   + 6-cylinder petrol engines
   + Diesel engines
   - System of greasing of the engine
      Check of pressure of oil
      Removal and installation of the sensor of level of oil
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



москва двери стальные
стоимость металлопроката динамика цен.
купить детские конструкторы оптом для мальчика 4 года



Removal and installation of the sensor of level of oil

Removal

 PERFORMANCE ORDER

1. Remove the bottom cover of an impellent compartment, address to the Section engine Check by means of the vacuum gage.
2. Merge impellent oil or suck away it, address to the Section Replacement of impellent oil and the oil filter.

3. Disunite the socket (1) sensor of level of oil (2).

4. Turn out bolts (3). Incline the sensor and take out it from the case pallet.


Installation

 PERFORMANCE ORDER

1. Establish the sensor of level of oil with a new sealing ring and fix it the moment 14Нм (at the new pallet of a case the moment 10Нм).
2. Join the socket.
3. Establish the bottom cover of an impellent compartment, address to the Section engine Check by means of the vacuum gage.
4. Fill in in system impellent oil, address to the Section Replacement of impellent oil and the oil filter.
5. Start and warm up the engine. Check the sensor of level of oil on tightness.


6-cylinder petrol engine

 PERFORMANCE ORDER

1. Remove the lower part of the pallet of a case.
2. Disconnect from below the sensor of level of oil (in front, near a pipe of absorption of oil), having unscrewed 2 Torx screws.
3. Fix the sensor of level of oil the moment 10Нм.