Multipurpose steering wheel, universal display
Buttons on a multipurpose steering wheel depending on a complete set of your car the call on the universal display of mentioned below systems, management by them and installation of their parameters can be made:
1 — a run Measuring instrument from the moment of dumping and the counter of the general run
The index of temperature of cooling liquid
Digital indication of speed
Indicator of term of approach planned THAT (ASSYST)
Indication of level of impellent oil
2 — Audiosystems
Radio receiver
CD player
Cassette deck
3 — Navigation system
4 — Memory of display of faults
5 — Individual installation
6 — the Travelling computer
From the moment of start
From the moment of dumping
Course stock
7 — Phone The button or press until the demanded system will be displayed. With each new pressing of the button the following system is displayed.
In some systems additional indications can be caused by pressing of the button or.
|
|
Indications on the universal display, depending on installation, are made in German, English, French, Italian or Spanish languages. Switching on other language - see the INSTRUMENT CLUSTER menu system (CONTROL PANEL) «Individual installation» the TEHT installation menu (TEXT LANGUAGE). |
Irrespective of the established language, on models with Audio system 10 radio receivers, Аudio 10 CDs or Audio 30 APS of indication of audiosystems (a radio receiver, the CD player, cassette a deck), and also indications on phone appear in English.
1 — the Universal display
2 — the Multipurpose steering wheel
Turn a key in the ignition switch in situation 1 or 2.
Press the button:
3 — the Following system
4 — the Previous system
5 — the Following indication within system
6 — the Previous indication within system
7 — Increase in loudness
8 — loudness Reduction
9 — a phone number Set, reception of arriving telephone conversation
10 — the Completion of telephone conversation, refusal of reception of arriving telephone conversation
11 Sound signal on a soft cover
The button or press until the demanded system will be displayed.
With each new pressing of the button the following system is displayed.
In some systems additional indications can be caused by pressing of the button or.
Run measuring instruments, term indicators THAT and indexes - speeds, temperatures of OZh and oil level
1 — Zeroing of a measuring instrument of run from the moment of dumping (see below)
2 — the Index of temperature of cooling liquid (see below)
3 — Digital indication of speed - if in system «Individual installation» in the INSTRUMENT CLUSTERS menu (CONTROL PANEL), in the SELECT DISPLAY installation menu (the INDICATION CHOICE), is chosen the SPEED installation (SPEED) (see below)
Indication of temperature of external air 1 - if in system «Individual installation», in the INSTRUMENT CLUSTERS menu (CONTROL PANEL), in the SELECT DISPLAY installation menu (the INDICATION CHOICE), is chosen the OUTSIDE TEMPERATURE installation (TEMPERATURE of EXTERNAL AIR) (see below)
4 — the Indicator of term of approach planned THAT (ASSYST) (Head Routine maintenance)
5 — Indication of level of impellent oil (Head Routine maintenance)
1) Except for Great Britain
The button or press until there will be an indication of a measuring instrument of run from the moment of dumping and the counter of the general run (1).
The button or press until there will be a demanded indication (2, 3, 4, 5, 1).
The pressing of the button or displays the following or previous system.
Audiosystems
Depending on the included audiosystem there is the corresponding indication on the display.
Radio receiver - indication for audiodevices and COMAND system
1 — Any audiosystem is not included
2 — the radio receiver Is included
3 — the strip of frequencies and, if necessary, in addition number of a cell of memory Is established
4 — the Name of the adjusted radio station or its frequency
5 — «SP» (memory) - if in system «Individual installation», in the VEHICLE menu (CAR), in the PRESS BUTTON IN AUDIO MODE installation menu (BUTTON PRESSING IN the AUDIO MODE), is chosen the MEMORY installation (MEMORY), INSTEAD OF «STATION SEARCH» (RADIO STATION SEARCH)
Include a radio receiver (separate "Operation manual").
The button or press until there will be an indication (2).
The button or press until the demanded radio station or frequency will be displayed.
The button or frequency of radio station or the remembered radio station can get out. It depends on installation in the menu of the PRESS BUTTON installations of "IN AUDIO MODE" (BUTTON PRESSING IN the AUDIO MODE) (see. «Individual installation», VEHICLE menu (CAR)
The pressing of the button or displays the following or previous system.
The CD player - indication for audiodevices
The CD player - indication for COMAND system
1 — Any audiosystem is not included
2 — the CD player is switched on
3 — At CD-cheyndzhera number of a lost compact disc is displayed
4 — Number of a piece of music
Turn on the CD player (separate "Operation manual").
The button or press until there will be an indication (2).
The button or press until demanded number of a piece of music (4) will be displayed.
The pressing of the button or displays the following or previous system.
The cassette tape recorder - indication for Audio 10
1 — Any audiosystem is not included
2 — It is included cassette a deck
3 — the Lost party
Include cassette to a deck (separate "Operation manual").
The button or press until there will be an indication (2).
Press the button - the rewinding is made prior to the beginning of the following piece of music.
Press the button - the rewinding is made prior to the beginning of a lost piece of music.
The pressing of the button or displays the following or previous system.
Navigation system - indication for Audio 30 APS and COMAND system
1 — the Navigation system is switched off
2 — the Navigation system is included, but support of the purpose is not made
3 — the Navigation system is included, and purpose support is activated
The button or press until the demanded system will be displayed.
(Navigation system - separate "Operation manual" on COMAND systems (Cockpit Management and Data System) or Audio 30 APS).
The pressing of the button or displays the following or previous system.
Memory of display of faults
1 — Malfunctions are absent
2 — Number of malfunctions
3 — In memory of display of faults malfunctions are remembered
The button or press until memory of display of faults will be displayed.
If there will be an indication (2), press the button or. After that consecutive display of faults is made.
(System of the notification and the alarm system of malfunctions - see. The section Precautionary alarm and control lamps, and also messages of the information display on the registered malfunctions)
On termination of indication of all malfunctions again there is an indication (2).
If malfunctions arose during movement, indication (2) appears once again when the key in the switch of ignition turns in situation 0 or is taken out. On a control panel it is possible to cause repeated display of faults in pressing of the button of dumping of indications (The section the Control panel).
At a key povorachivaniye in the ignition switch in situation 1 or 2 memory of display of faults is dumped.
If malfunctions arose repeatedly, they are again displayed in memory of display of faults.
The pressing of the button or displays the following or previous system.
Individual installation
1 — Base indication of individual installation
2 — «SETTING» (INSTALLATION) - in this additional menu it is possible to cause the demanded menu: «INSTRUMENT CLUSTER» (CONTROL PANEL) (see below)
«LIGHTING» (LIGHTING) (see below)
«VEHICLE» (CAR) (see below)
«HEATER» (HEATING) (see below)
«CONVENIENCE» (COMFORTABLE MANAGEMENT) (see below)
Each menu has in turn additional submenu - the menu of installations. In them can be then the corresponding installations are made.
3 — Dumping of the additional SETTINGS menu (INSTALLATION), request for confirmation (see below)
4 — the Confirming message
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed
The button or press until the demanded menu will be noted:
«INSTRUMENT CLUSTER» (CONTROL PANEL) (see below)
«LIGHTING» (LIGHTING)
«VEHICLE» (CAR) (see below)
«HEATER» (HEATING) (see below)
«CONVENIENCE» (COMFORTABLE MANAGEMENT) (see below)
The pressing of the button or displays the following or previous system.
Dumping of the SETTINGS menu (INSTALLATION) (2):
If you make dumping of the SETTINGS menu (INSTALLATION) (2), all installations again become factory installation.
Cause base indication of system «Individual installation» (1) or «SETTINGS» (INSTALLATION) (2)
The button of dumping of indications on a control panel (The section the Control panel) press and hold the pressed about 3 seconds. There is an indication (3).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (4).
If the button of dumping of indications is not pressed, approximately in 5 seconds there is a base indication of system «Individual installation» (1). In this case menus of installations are not dumped.
|
|
When dumping indications during movement for safety reasons in the LIGHTING menu (LIGHTING) And «VEHICLE» (CAR) all menus of installations (see below) are dumped not. |
CONTROL PANEL menu
1 — Base indication of individual installation
2 — «SETTINGS» (INSTALLATION) - the additional menu for a menu choice
3 — «SET TIME» (TIME INSTALLATION) «HOURS» (HOURS) 1
4 — «SET TIME» (TIME INSTALLATION) «MINUTES» (MINUTE)
5 — «12/24 O’CLOCK» - the 12th or 24-hour indication
6 — «TEMP. INDICATOR» (the TEMPERATURE INDICATOR) - the established unit of measure is displayed on the indicator of temperature of external air on a control panel, and on models with the automated conditioner of air with comfortable management also on the display of this system
7 — «DISPLAY VALUES IN» (VALUES ON the DISPLAY B) - installation is valid for all indications on the universal display (not for a speedometer)
8 — "TEHT" (TEXT LANGUAGE) - language installation for indication on the universal display
9 — «SELECT DISPLAY» (the INDICATOR CHOICE) 2 - the chosen option «SPEED DISP.» (SPEED) or «OUTSIDE TEMPERATURE» (TEMPERATURE of EXTERNAL AIR) is constantly displayed on the universal display.
«SPEED DISP.» (SPEED), for example, can be used for additional indication of speed of movement in miles if (SPEEDOMETER) is established to the menu of installations (7) "SPEEDOMETER" on «MILES» (MILES)
10 — CONTROL PANEL menu Dumping, request for confirmation (see below)
11 — the Confirming message
|
|
On the block diagram the example of possible installation is presented. |
1 Only models without COMAND system or without Audio 30 APS. (COMAND or Audio system of 30 APS - separate "Operation manual").
2 except for Great Britain.
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed
The button or press until the INSTRUMENT CLUSTER menu (CONTROL PANEL) will be noted.
The button or press until the demanded menu of installation (2-9) will be displayed.
In the menu of installations (3, 4) the pressing the button or establishes time, and in the menu of installations (5-9) demanded installation gets out.
The chosen installation is noted.
The made installations are remembered and immediately carried out.
After passing of all of the menu of installations base indication of system «Individual installation» (1) is again displayed.
The pressing of the button or displays the following or previous system.
Dumping the INSTRUMENT CLUSTER menu (CONTROL PANEL) (5-9) on factory installation:
Cause one of the menu of installations (5-9).
The button of dumping of indications on a control panel (The section the Control panel), press and hold the pressed about 3 seconds. There is an indication (10).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (11).
If the button of dumping of indications is not pressed, approximately in 5 seconds the additional SETTINGS menu (INSTALLATIONS) (2) is displayed. In this case menus of installations are not dumped.
LIGHTING menu
1 — Base indication of individual installation
2 — «SETTINGS» (INSTALLATION) - the additional menu for a menu choice
3 — «LIGHT CIRCUIT HEADLAMP MODE» (SWITCHING of LIGHT of HEADLIGHTS) (Undressed Switches)
4 — «LOCATOR LIGHTING» (LIGHTING FOR ORIENTATION) (Undressed Switches)
5 — «HEADLAMPS DELAYED SWITCH-OFF» (the SLOWED-DOWN SWITCHING OFF of LIGHT of HEADLIGHTS (Undressed Switches)
6 — «INT. ILLUMINATION DELAYED SWITCH-OFF» (SHUTDOWN of INTERNAL LIGHTING WITH ENDURANCE of TIME) (Undressed Window regulators, the roof hatch)
7 — Dumping the LIGHTING menu (LIGHTING), request for confirmation (see below)
8 — the Confirming message
|
|
On the block diagram the example of possible installation above is presented. |
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed.
The button or press until the LIGHTING menu (LIGHTING) will be noted.
The button or press until the demanded menu of installation (2-6) will be displayed.
In the menu of installations (3-6) installation gets out in pressing of the button or. The chosen installation is noted.
The made installations are remembered and immediately carried out.
After passing of all of the menu of installations base indication of system «Individual installation» (1) is again displayed.
The pressing of the button or displays the following or previous system.
Dumping the LIGHTING menu (LIGHTING) (3-6) on factory installation:
Cause one of the menu of installations (3-6).
The button of dumping of indications on a control panel (The section the Control panel) press and hold the pressed about 3 seconds. There is an indication (7).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (8).
If the button of dumping of indications is not pressed, approximately in 5 seconds the additional SETTINGS menu (INSTALLATIONS) (2) is displayed. In this case menus of installations are not dumped.
|
|
When dumping indications during movement for reasons of safety of the menu of the HEADLAMP MODE installation (SWITCHING of LIGHT of HEADLIGHTS) it is not dumped. There is «LIGHTING CANNOT BE COMPLETELY RESET TO FACTORY SETTINGS WHILE DRIVING» message (LIGHTING during MOVEMENT NOT is DUMPED COMPLETELY ON FACTORY INSTALLATION). |
CAR menu
1 — Base indication of individual installation
2 — «SETTINGS» (INSTALLATION) - the additional menu for a menu choice
3 — «SPEED LIMIT (WINTER TYRES)» (RESTRICTION of SPEED, the TYRE WITH WINTER DRAWING of the PROTECTOR) »1, - the constant limiter of speed (The section Driving and auxiliary systems).
Choice possibility at models with the petrol engine: "Off", «240 km/h» to «160 km/h» in steps on 10 km/h.
Choice possibility at models with the diesel engine: "Off", «210 km/h», «190 km/h», «160 km/h».
4 — «PRESS BUTTON IN AUDIO MODE» (BUTTON PRESSING IN the AUDIO mode) - radio receiver installation
«STACION SEARCH» (RADIO STATION SEARCH) - the button or gets out frequency
«MEMORY» (MEMORY) - the button or gets out the remembered radio station
5 — «AUTOMATIC DOOR CLOCK» (AUTOMATIC LOCKING of DOORS) (Undressed Locks, keys and locks. Uniform lock)
6 — CAR menu Dumping, request for confirmation (see below)
7 Confirming message
|
|
On the block diagram the example of possible installation above is presented. |
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed.
The button or press until the VEHICLE menu (CAR) will be noted.
The button or press until the demanded menu of installation (2-5) will be displayed.
In the menu of installations (3-5) demanded installation gets out in pressing of the button or. The chosen installation is noted. The made installations are remembered and immediately carried out.
After passing of all of the menu of installations base indication of system «Individual installation» (1) is again displayed.
The pressing of the button or displays the following or previous system.
Dumping the VEHICLE menu (CAR) (3-5) on factory installation:
Cause one of the menu of installations (3-5).
The button of dumping of indications on a control panel press and hold the pressed about 3 seconds. There is an indication (6).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (7).
If the button of dumping of indications is not pressed, approximately in 5 seconds the additional SETTINGS menu (INSTALLATIONS) (2) is displayed. In this case menus of installations are not dumped.
|
|
When dumping indications during movement for reasons of safety of the menu of installation (RESTRICTION of SPEED, the TYRE WITH WINTER DRAWING of the PROTECTOR) is not dumped by "SPEED LIMIT (WINTER TYRES)». There is a message «VEHICLE CANNOT BE COMPLETELY RESET TO FACTORY SETTINGS WHILE DRIVING!» (The CAR during MOVEMENT NOT is DUMPED COMPLETELY ON FACTORY INSTALLATION). |
Heating menu
1 — Base indication of individual installation
2 — «SETTINGS» (INSTALLATION) - the additional menu for a menu choice
3 — «AUXILIARY HEATING» (THE INDEPENDENT HEATER)
4 — «AUXILIARY HEATING SWITCH-ON TIME 1 HOURS» (THE INDEPENDENT HEATER, TIME OF INCLUSION 1 - HOURS) 1, 2
5 — «AUXILIARY HEATING SWITCH-ON TIME 1 MINUTS» (THE INDEPENDENT HEATER, TIME OF INCLUSION 1 - MINUTES)
6 — «HEATER BOOSTER» (THE ADDITIONAL HEATING DEVICE) 3
7 — Dumping the HEATER menu (HEATING), request for confirmation
8 — the Confirming message
|
|
On the block diagram the example of possible installation above is presented. |
1) Only models with an independent heater
2) Appears only if in the menu of installations (3) "AUXILIARY HEATING" (the INDEPENDENT HEATER) «TIME» (TIME) is chosen.
3) Only models with the diesel engine.
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed.
The button or press until the HEATING menu (HEATING) will be noted.
The button or press until the demanded menu of installations (2-6) will be displayed.
In the menu of installations (4, 5) the pressing the button or establishes time, and in the installation menu (3, 6) demanded installation gets out. The chosen installation is noted.
The made installations are remembered and immediately carried out.
After passing of all of the menu of installations base indication of system «Individual installation» (1) is again displayed.
The pressing of the button or displays the following or previous system.
Dumping the HEATING menu (HEATING) (3-6) on factory installation.
Cause one of the menu of installations (3-6).
The button of dumping of indications on a control panel (The section the Control panel) press and hold the pressed about 3 seconds. There is an indication (7).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (8).
If the button of dumping of indications is not pressed, approximately in 5 seconds the additional SETTINGS menu (INSTALLATIONS) (2) is displayed. In this case menus of installations are not dumped.
Installation menu «INDEPENDENT HEATER»
Do not include an independent heater at filling stations and in the closed rooms without an extract (for example, in garages).
Installation and choice of demanded time of inclusion
Cause the installation (3) "AUXILIARY HEATING" menu (the INDEPENDENT HEATER).
In pressing the button or note, for example, «TIME 1» (TIME 1).
Cause the installation (4) "AUXILIARY HEATING" menu (the INDEPENDENT HEATER) «SWITCH-ON TIME 1 HOURS» (TIME of INCLUSION 1, HOURS) and pressing of the button or establish demanded hours.
Cause the installation (5) "AUXILIARY HEATING" menu (the INDEPENDENT HEATER) «SWITCH-ON TIME 1 MINUTES» (TIME of INCLUSION 1, MINUTES) and pressing of the button or establish demanded minutes.
Time of inclusion of an independent heater is established and chosen.
Choice of demanded time of inclusion:
Cause the installation (3) "AUXILIARY HEATING" menu (the INDEPENDENT HEATER).
In pressing the button or note the demanded TIME menu (TIME).
Time of inclusion of an independent heater is chosen.
The menu «Comfortable management» (models with memory function)
1 — Base indication of individual installation
2 — «SETTINGS» (INSTALLATION) - the additional menu for a menu choice
3 — «EASY-ENTRY FEATURE ACTIVATE» (to ACTIVATE SYSTEM of ASSISTANCE to LANDING) (Undressed Simplification of landing and disembarkation from the car)
4 — «SETTINGS» (INSTALLATION) of "KEY-DEPENDENT" (DEPENDING ON the KEY) - if it is chosen the ON installation (INCL.), all installations made in the menu of system «Individual installation», can be entered into memory depending on a key. (Memory function - see. Section Memory of provisions of seats, steering wheel and external mirrors)
5 — «MIRROR SETTING WHEN PARKING» (ADJUSTMENT of PROVISION of MIRRORS AT the PARKING) (Undressed the Steering wheel, rear-view mirrors)
6 — CONVENIENCE menu Dumping (COMFORTABLE MANAGEMENT), request for confirmation (see below)
7 — the Confirming message
|
|
On the block diagram the example of possible installation above is presented. |
The button or press until there will be a base indication of system «Individual installation» (1).
The button or press until the additional SETTINGS menu (INSTALLATIONS) (2) will be displayed.
The button or press until the CONVENIENCE menu (COMFORTABLE MANAGEMENT) will be noted.
The button or press until the demanded menu of installation (2-5) will be displayed.
In the menu of installations (3-5) demanded installation gets out in pressing of the button or. The chosen installation is noted. The made installations are remembered and immediately carried out.
After passing of all of the menu of installations base indication of system «Individual installation» (1) is again displayed.
The pressing of the button or displays the following or previous system.
CONVENIENCE menu dumping (COMFORTABLE MANAGEMENT) (3-5) on factory installation:
Cause one of the menu of installations (3-5).
The button of dumping of indications on a control panel (The section the Control panel) press and hold the pressed about 3 seconds. There is an indication (6).
Repeatedly press the button of dumping of indications. For confirmation there is an indication (7).
If the button of dumping of indications is not pressed, approximately in 5 seconds the additional SETTINGS menu (INSTALLATIONS) (2) is displayed. In this case menus of installation are not dumped.
Traveling computer
1 — «AFTER START» – a run measuring instrument from the moment of start
2 — «AFTER RESET» - a run measuring instrument from the moment of dumping
3 — «RANGE» (the COURSE STOCK) - indication of availability of fuel in a fuel tank with the approximate indication of a distance which can be passed with an available stock of fuel
4 — Run from the moment of start or dumping in «AFTER START» or «AFTER RESET» km
5 — Time from the moment of start or «AFTER START» or «AFTER RESET» dumping
6 — Average speed from the moment of start or «AFTER START» or «AFTER RESET» dumping
7 — Average fuel consumption from the moment of start or «AFTER START» or «AFTER RESET» dumping
The button or press until there will be an indication (1, 2 or 3).
The button or press until there will be an indication of a measuring instrument of run from the moment of start of "AFTER START" (1), a run measuring instrument from the moment of dumping of "AFTER RESET" (2) or indication of a reserve of fuel (3).
The pressing of the button or displays the following or previous system.
|
|
By a repeated call of the traveling computer always there is a measuring instrument indication from the moment of «AFTER START» (1) start. |
Dumping of a measuring instrument of run from the moment of start of "AFTER START" (1) or a run measuring instrument from the moment of «AFTER RESET» (2) dumping
The button or cause the corresponding indication (1 or 2) and, having pressed the button of dumping of indications on a control panel (The section the Control panel) to wait dumping of indications on «0».
|
|
At a key povorachivaniye in the ignition switch in situation 0 or its vynimaniye approximately in 4 hours dumping of a measuring instrument of run is automatically made from the moment of «AFTER START» (1) start if during this time the key does not turn again in situation 1 or 2. |
Phone
The telephone directory - indication for audiodevices
The telephone directory - indication for COMAND system
1 — Phone is switched off.
2 — PIN code Input (a personal identification code) SIM cards - separate «The operation manual on phone» or respectively "Operation manual" on Linguatronic system
3 — It is prospected the corresponding telephone system
4 — Phone is ready for operation. The relevant provider of the GSM network is displayed
5 — Now the car out of a transfer or reception range
6 — the telephone directory remembered on a telephone card or in phone Is read out. Duration - about 30 seconds
7 — the surname Chosen from the telephone directory
8 — Number of the chosen subscriber, begins process of a set of number
9 — Process of a set of number is finished, and the surname is displayed. Indication remains during all telephone conversation
10 — Force of a signal - on the right on the display on models with audiodevices: the number is higher, the accepted signal of the GSM network is stronger
Force of a signal - at the left on the display on models with COMAND system: the it is more displayed strips, the accepted signal of the GSM network is stronger
11 — Number of a cell of memory
12 — Indication of duration of conversation
Phone and the audiodevice or COMAND system should be switched on.
The button or press until there will be the relevant provider of the GSM (4) network. At emergence of indication (2) at first enter the PIN code (separate «The operation manual on phone» or respectively «The operation manual on Linguatronic system).
Press the button or, the telephone directory "is glanced over" alphabetically forward or back. The corresponding chosen surname appears on the display.
Models with a radio receiver of Audio 10 CDs or Comand system:
If the button or is pressed more long than one second, accelerated "prolistyvaniye" of the telephone directory is made.
|
|
If you decided not to call, press the button. Process interrupts, and there is an indication (4). |
Press the button if on the display the surname of the demanded subscriber (7) is displayed. Phone number (8) is dialed.
If process of a set of number is finished, the surname (9) is displayed. Indication (9) remains during all telephone conversation.
Press the button, telephone conversation comes to an end, there is an indication (4).
The pressing of the button or displays the following or previous system.
Repeated call of the subscriber - indication for audiodevices
Repeated call of the subscriber - indication for COMAND system
1 — Phone is ready for operation. The relevant provider of the GSM network is displayed
2 — Number or a surname in memory of a repeated call of the subscriber
3 — Number in memory of a repeated call of the subscriber - is begun process of a set of number
4 — Process of a set of number is finished, and the surname of the subscriber remembered in the telephone directory or dialed number if the surname of the subscriber is not remembered is displayed. Indication remains during all telephone conversation
5 — Force of a signal - on the right on the display on models with audiodevices:
the number is higher, the accepted signal of the GSM network is stronger
Force of a signal - at the left on the display on models with COMAND system:
the it is more displayed strips, the accepted signal of the GSM network is stronger
6 — Number of a cell of memory of COMAND system: the last 10 typed numbers are remembered.
L0, the last dialed number,
L1-L9, the previous typed numbers
Number of a cell of memory of audiodevices:
the last 9 typed numbers are remembered,
LO, the last dialed number,
L1-L9, the previous typed numbers
7 — Indication of duration of conversation
Phone and the audiodevice or COMAND system should be switched on.
The button or press until there will be the relevant provider of the GSM (1) network.
Press the button - memory of a repeated call of the subscriber is activated, and the customer address gathered by the last is displayed.
Press the button or - memory of a repeated call of the subscriber "is glanced over" forward or back. The corresponding chosen number appears on the display.
|
|
If you decided not to call, press the button. Process interrupts, and there is an indication (1). |
Press the button if on the display (2) demanded number or a surname of the demanded subscriber is displayed.
Phone number (3) is dialed.
If process of a set of number is finished, the surname (4) if it is remembered in the telephone directory is displayed; phone number indication otherwise remains. Indication remains during all telephone conversation.
Press the button, telephone conversation comes to an end, there is an indication (1).
The pressing of the button or displays the following or previous system.
Arriving call
1 — to you call
2 — Force of a signal - on the right on the display on models with audiodevices:
the number is higher, the accepted signal of the GSM network is stronger
Force of a signal - at the left on the display on models with COMAND system:
the it is more displayed strips, the accepted signal of the GSM network is stronger.
Phone is reported to be switched on.
Press the button and accept a call.
Press the button - conversation comes to an end, there is an indication with the corresponding telephone system.
|
|
If you do not want to accept the arrived call, press the button. |
Volume control
Press the button
increase in loudness.
loudness reduction.
Be regulated always loudness of the activated or chosen system can only.
Those are audiosystems, phone, radio service of informing on a situation on roads, a speech conclusion of navigation system and a speech conclusion of system of voice-activated control of "Linguatronic".
|
|
On models with COMAND system the made volume control is remembered for each system separately. |
The index of temperature of cooling liquid
Turn a key in the ignition switch in situation 1 and 2;
If are not displayed a run measuring instrument from the moment of dumping and the counter of the general run, the button or on a multipurpose steering wheel press until there will be an indication (see above).
The button or press until there will be an indication of temperature of cooling liquid.
At appropriate filling by antifreeze with anticorrosive additives the boiling point of cooling liquid in pressure head system of cooling is reached at temperature approximately 130°С.
At high temperatures of external air and at movement in mountains temperature increase of cooling liquid till the end of a scale is allowed.
|